Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: RBPLC on December 09, 2020, 01:50:00 PM

Title: Yay!!! No More And-Above-Join Errors
Post by: RBPLC on December 09, 2020, 01:50:00 PM
Subject says it all!
Title: Re: Yay!!! No More And-Above-Join Errors
Post by: franji1 on December 09, 2020, 02:25:36 PM
The Updates.pdf file says "Thank you to all Customers since 1994" for pointing out this missing feature.  ;D
Title: Re: Yay!!! No More And-Above-Join Errors
Post by: RBPLC on December 09, 2020, 03:13:53 PM
Is there any limit to the depth? I've got it at 5 deep now and it seems to be working fine.
Title: Re: Yay!!! No More And-Above-Join Errors
Post by: franji1 on December 09, 2020, 03:30:52 PM
Quote from: RBPLC on December 09, 2020, 03:13:53 PM
Is there any limit to the depth? I've got it at 5 deep now and it seems to be working fine.
The boolean stack, which is 32.  That's very hard.

That's NESTING level, not NUMBER OF BRANCHES.  The Number of branches I guess is limited to ~255 rows in a single ladder rung, the maximum rung height.

It's hard to get a rung that deep, even using just "simple" STR/ANDSTR/ORSTR, let alone this (DUPBOOL/POPBOOL)
Title: Re: Yay!!! No More And-Above-Join Errors
Post by: johnr on December 09, 2020, 04:45:24 PM
Thankyou thankyou thankyou thankyou thankyou

Automation Direct has been my PLC platform of choice for almost 15 years now, but this has been my biggest single complaint since the very beginning.  Didn't know this one was coming!