Host Engineering Forum
General Category => General Discussion => Topic started by: smartvn2020 on November 13, 2020, 03:06:17 AM
-
Found something by accident. I did not know the C bits were retentive, I was use to DS software 1-300 were not retentive. I got a warning message that is how i found out. I like the way I was able to go in and set c0-c100 to non-retentive.
Is there any danger in doing this? If the machine is shut down, I do not want those range of bits to stay active.
Keep finding jewels in the new Do-more.
http://smartpm.com.vn/tin-tuc/cong-ty-che-tao-khuon-duc-nhua-chinh-xac.html (http://smartpm.com.vn/tin-tuc/cong-ty-che-tao-khuon-duc-nhua-chinh-xac.html)
-
Found something by accident. I did not know the C bits were retentive, I was use to DS software 1-300 were not retentive. I got a warning message that is how i found out. I like the way I was able to go in and set c0-c100 to non-retentive.
Is there any danger in doing this? If the machine is shut down, I do not want those range of bits to stay active.
Keep finding jewels in the new Do-more.
No danger at all. We default most of the built-in memories to retentive, but the setting is there for you to use however you wish.