Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: RBPLC on October 02, 2020, 10:54:27 AM

Title: Proper Way to Copy Program to Another Controller
Post by: RBPLC on October 02, 2020, 10:54:27 AM

I have two same controllers configured exactly the same with the exception of ip addresses being different between the controllers. I've developed a program on one and want to copy it to the other. How do I do this?

Title: Re: Proper Way to Copy Program to Another Controller
Post by: RBPLC on October 02, 2020, 11:08:27 AM

DMLoader. Got it. Usually helps to RTM.

Title: Re: Proper Way to Copy Program to Another Controller
Post by: BobO on October 02, 2020, 12:49:57 PM

DMLoader is one way. DmD is fine too. Just open the disk project, connect to the PLC, choose disk when prompted, then write to the PLC. You can also use an SDCard to clone systems.