Host Engineering Forum

General Category => Ethernet SDK => Topic started by: Nyarlatothep on December 15, 2008, 03:00:45 PM

Title: Ethernet SDK + T1H-EBC + T1F-14THM
Post by: Nyarlatothep on December 15, 2008, 03:00:45 PM

while using your EtherIO demo software provided in the SDK I come eup with this error and am wondering what it pertains to.

Device Errors Exist

Slot: 2
Class: 16(extended error)
channel: 1 BT
channel: 2 BT
channel: 3 BT
channel: 4 BT
channel: 5 BT
channel: 6 BT
channel: 7 BT
channel: 8 BT
channel: 9 BT
channel: 10 BT
channel: 11 BT
channel: 12 BT
channel: 13 BT
channel: 14 BT




This setup has 2 T1F-14THM installed in slot 1 and slot 2. The module installed in slot 1 works just fine and no error occurs while just slot 1 is populated. Any info on what would cause this error would be greatly appreciated.

Title: Re: Ethernet SDK + T1H-EBC + T1F-14THM
Post by: MikeS on December 15, 2008, 03:25:41 PM

that error indicates a broken transmitter alarm on all 14 channels meaning you have no thermocouples installed.