Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: mhw on April 02, 2020, 06:54:54 AM

Title: Cmore not reading tags
Post by: mhw on April 02, 2020, 06:54:54 AM

I updated the firmware to V2.72 on a T1H-DM1E. After I did this the Cmore no longer read the tags that were cast, ie. V10:2. Is it something in V2.72 or coincidence?

Title: Re: Cmore not reading tags
Post by: BobO on April 02, 2020, 07:56:44 AM

Quote from: mhw on April 02, 2020, 06:54:54 AM

I updated the firmware to V2.72 on a T1H-DM1E. After I did this the Cmore no longer read the tags that were cast, ie. V10:2. Is it something in V2.72 or coincidence?

Which driver?

Title: Re: Cmore not reading tags
Post by: mhw on April 02, 2020, 01:31:17 PM

AutomationDirect Do-more Ethernet Symbolc

Title: Re: Cmore not reading tags
Post by: BobO on April 02, 2020, 01:42:03 PM

There was a change that affected bit reads, but it was to fix an existing bug. That might have caused C-more some heartburn, but it was correcting a problem ADC found. I just checked it again, and it does appear to be working as I would expect.