Host Engineering Forum

General Category => CTRIO and CTRIO2 => Topic started by: PMJ on January 18, 2020, 01:47:11 PM

Title: JMC Motor Integration
Post by: PMJ on January 18, 2020, 01:47:11 PM

I'm trying to use an H2-CTRIO to drive a JMC Motor AC Hybrid stepper.  I'm having an issue with hitting position error limit.  I was curious if anyone has experience with JMC Motor Drivers?  I've tried just about every parameter setting on the drive without success.  The only possible issue I can think of is rise/fall cycle time, the JMC requires a minimum of 2.5us.  I believe the H2-CTRIO minimum is 3.0us, if so that should not be an issue....any comments appreciated