Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: azeotrope on August 29, 2019, 08:17:59 AM

Title: brx 24v supply
Post by: azeotrope on August 29, 2019, 08:17:59 AM

Hello all, moving from 205 style to BRX. I an 8 point analog input BX-08AD-1 that is wired with a ziplink . I cant seem to provide 24v to the module as required. I as using a separate power supply (not the one off the plc) does anyone know where on  zip module the 24V should go? I have studied the pin-outs but everything I try shorts the power supply.
Thanks

Title: Re: brx 24v supply
Post by: ADC Product Engineer on August 29, 2019, 11:00:56 AM

There are labels that come in the bag with the cable.  These tell where to put the wires.