Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: ddubs2248 on March 29, 2019, 10:55:01 AM

Title: JSONBUILD
Post by: ddubs2248 on March 29, 2019, 10:55:01 AM

The new JSONBUILD instruction is slick guys!  Worked flawlessly right out of the gate (at least with simple values I was sending).  Had it move data right into Ignition with little setup and anytime I added anything to the JSONBUILD, my tag was created in Ignition.  This will save tons of time and only require end users to get it right in one place....the PLC!!  Great job, hats off, pats on the back and whatever other motivational saying to keep you guys making improvements on an already serious controller!! 

Yes Pinky...Yes!

Title: Re: JSONBUILD
Post by: BobO on March 29, 2019, 11:33:50 AM

Quote from: ddubs2248 on March 29, 2019, 10:55:01 AM

The new JSONBUILD instruction is slick guys!  Worked flawlessly right out of the gate (at least with simple values I was sending).  Had it move data right into Ignition with little setup and anytime I added anything to the JSONBUILD, my tag was created in Ignition.  This will save tons of time and only require end users to get it right in one place....the PLC!!  Great job, hats off, pats on the back and whatever other motivational saying to keep you guys making improvements on an already serious controller!! 

Yes Pinky...Yes!

Outstanding!  ;D

Title: Re: JSONBUILD
Post by: Controls Guy on April 01, 2019, 11:23:59 AM

This looks really cool!

Hope to get some time this week to play with it.

Title: Re: JSONBUILD
Post by: franji1 on April 01, 2019, 11:54:39 AM

Quote from: Controls Guy on April 01, 2019, 11:23:59 AM

This looks really cool!

Hope to get some time this week to play with it.

And in case it's not obvious, integrated UDT support within JSONBUILD editor will drive UDT definition usage with JSONBUILD needs and vice versa.

Title: Re: JSONBUILD
Post by: gadagetavi8tor on April 25, 2019, 07:03:20 PM

I am an early user of the H2-DM1E, we are testing out several dashboard systems.  Initial State being one.  Sending JSON packets directly to a Dashboard App would be fantastic.  Are you planning to release the JSON instructions for the DM1E?  This really moves the world of PLCs forward!

Title: Re: JSONBUILD
Post by: BobO on April 25, 2019, 11:07:48 PM

Quote from: gadagetavi8tor on April 25, 2019, 07:03:20 PM

I am an early user of the H2-DM1E, we are testing out several dashboard systems.  Initial State being one.  Sending JSON packets directly to a Dashboard App would be fantastic.  Are you planning to release the JSON instructions for the DM1E?  This really moves the world of PLCs forward!

The H2-DM1E is easily capable of doing it, but we're in a bit of a quandary in expanding the OS flash storage space. BRX can do pretty much everything the H2 can, plus lots it can't, and it costs less.