Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: amos on September 02, 2018, 02:30:00 PM

Title: BRX comms issue
Post by: amos on September 02, 2018, 02:30:00 PM

I have an application where I communicate to 3 drives using the built in Port using modbus. I also use a rs232 POM module to talk to a wireless radio for remote control. The Brix is the master on both ports. What I noticed is if there is a comm error to the drives it creates a time delay on the other port too. This was something I hadn't figured on. I realise there a lot of ways to solve this but was wondering why this is. Or maybe I'm overlooking something.

Title: Re: BRX comms issue
Post by: amos on September 02, 2018, 11:02:24 PM

Well this is embarrassing. It works as expected now. On one for the comms to the drives I had selected the POM instead of the builtin port.

Title: Re: BRX comms issue
Post by: BobO on September 03, 2018, 11:26:54 AM

Glad it's working!