Host Engineering Forum

General Category => CTRIO and CTRIO2 => Topic started by: davidbgtx on July 19, 2018, 08:52:13 AM

Title: How to turn on inhibit on CTRIO with Do-More
Post by: davidbgtx on July 19, 2018, 08:52:13 AM

Can't figure out how to turn on the inhibit bit on the CTRIO in Do_More Designer. See pics, dropdown box only gives enable capture and reset.

Title: Re: How to turn on inhibit on CTRIO with Do-More
Post by: ADC Product Engineer on July 19, 2018, 09:07:59 AM

You have Inhibit assigned to physical input "D".  IIRC this is a physical only feature and there isn't any way to do it from the software itself. 

Title: Re: How to turn on inhibit on CTRIO with Do-More
Post by: BobO on July 19, 2018, 10:40:17 AM

Physical D input and can only be applied to the first function on a channel.

CTRIO(2) is limited due to the chip it runs on. BRX is far more flexible for stuff like this.

Title: Re: How to turn on inhibit on CTRIO with Do-More
Post by: davidbgtx on July 19, 2018, 11:39:11 AM

Wish I could justify replacing all my DL-205 racks (around 50) with BRX, but I'll just have to be satisfied with replacing the CPU's with the H2-DM1E for now. I have put in 2 BRX in new machines and like them!