Host Engineering Forum

General Category => ERM => Topic started by: markbyerley on July 06, 2018, 08:18:22 AM

Title: Using Ethernet switch to add 3 more EBCs
Post by: markbyerley on July 06, 2018, 08:18:22 AM

I have an existing DoMore H2-ERM100 module connected to a private ethernet switch with individual CAT5e cables going to remote T1H-EBC100 IO systems, total of 3; each IO system composed of (1)TIK-08ND3,-1 (1) T1K-08TD2-1, (1) T1F-8AD4DA, (1) T1F-14THM.

I am adding 3 identical T1H-EBC100 IO systems and need to extend the network from the last existing EBC100 using an unmanaged network switch.

For various reasons, running cables back to the existing switch is undesirable. Anyone tried this or advice would be appreciated

Title: Re: Using Ethernet switch to add 3 more EBCs
Post by: BobO on July 06, 2018, 09:42:24 AM

Should be fine.