Host Engineering Forum
General Category => Do-more CPUs and Do-more Designer Software => Topic started by: maciek74 on June 04, 2018, 12:09:23 PM
-
i have a network computer at work and the first time i installed the do more 2.2 software the simulator worked but the next day when i tried to use it i get the do more simulator stopped working and i couldn't get it to work since.
any ideas of fixes to my ignorance.
-
What do you mean by "stopped working". It goes from RUN to STOP after a couple hours, by design. Is this what you mean?
-
as soon as you open the do more sim i get this and only on a network computer
-
So are you running it on a PC that you did NOT install Designer on? That can definitely cause it to fail. The Simulator utilizes folders that get created by the installation program.
-
i installed the software on my access point which is a virtual computer and i can open it anywhere where i work on any other access point.
as soon as i open the do-more sim i get what shows on the picture
i do use click and c more direct soft 5 software and they all work.
-
i installed the software on my access point which is a virtual computer and i can open it anywhere where i work on any other access point.
as soon as i open the do-more sim i get what shows on the picture
i do use click and c more direct soft 5 software and they all work.
Rel 2.2 now installs to Program Files. Hence, the Simulator data files are now located in the "public documents"\Do-more\Designer2_2\bin folder. You need to create that folder on whatever PC you are running the Simulator on.
There may be other features that act strangely (Live Update, Help, et.al.). The software was not developed to run on multiple PCs off a central server. It may have "worked", but your installation is a little different than typical installations. Caveat Emptor.
-
thanks