Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: Evilbeard on November 10, 2017, 01:41:17 PM

Title: Timer Behavior
Post by: Evilbeard on November 10, 2017, 01:41:17 PM

I wanted to use the .TT bit on a timer I'm using. As far as I remember right, TT should be 1 as long as the timer is timing and the preset is less than the accumulated value, correct?

Actually, I just noticed, the .TT bit and the .DN bit don't work. Is this a known bug?

(https://i.imgur.com/SMYZGEU.png)


edit: I know I can just use the .timing bit in conjunction with the .done bit, but I just like to be efficient. :(

Title: Re: Timer Behavior
Post by: franji1 on November 10, 2017, 02:01:14 PM

Make sure you have the most recent firmware.

Title: Re: Timer Behavior
Post by: Evilbeard on November 10, 2017, 02:22:18 PM

Quote from: franji1 on November 10, 2017, 02:01:14 PM

Make sure you have the most recent firmware.

That was weird. It showed as 2.1.0 as my firmware version. I reloaded it and the booter/gate array and power cycled and everything is good. I don't know. :(  Sorry franji1 for the silly problem!