Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: ATU on September 29, 2017, 02:23:50 PM

Title: Download failure for Update
Post by: ATU on September 29, 2017, 02:23:50 PM

Tried to Update my Domore from the Update feature in the program. Got a download failure. Tried it on another network and same thing. Was able to download direct from AD's site.
Also, does the this version support Modbus on the POM's?

Title: Re: Download failure for Update
Post by: franji1 on September 29, 2017, 02:30:21 PM

Did it fail at the start? middle? end?

Title: Re: Download failure for Update
Post by: franji1 on September 29, 2017, 02:32:34 PM

Quote from: ATU on September 29, 2017, 02:23:50 PM

Also, does the this version support Modbus on the POM's?

Designer side, yes.  You will have to update the firmware for the PLC side.

Title: Re: Download failure for Update
Post by: ATU on September 29, 2017, 02:37:27 PM

It opened the box to download, but no progress shown. Then in Red Download failed.  I already upgraded using the ZIP file from AD. I had V 2.03 and the other person had 2.02.  Is the latest firmware for the POM included with in the ZIP package?

Title: Re: Download failure for Update
Post by: franji1 on September 29, 2017, 02:37:51 PM

It seems to be working fine.  We checked it out this morning, and I checked it out just now.  Not sure what you saw.   :-\

Title: Re: Download failure for Update
Post by: franji1 on September 29, 2017, 02:38:38 PM

Quote from: ATU on September 29, 2017, 02:37:27 PM

Is the latest firmware for the POM included with in the ZIP package?

2.1.2 install, yes.

Title: Re: Download failure for Update
Post by: ATU on September 29, 2017, 02:42:27 PM

Probably some corporate firewall thingy. Thanks!