Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: davidbgtx on September 19, 2017, 08:24:41 AM

Title: Slave Status fault bit ?
Post by: davidbgtx on September 19, 2017, 08:24:41 AM

If I have a communication fault with a slave (H2-EBC100 or GSEDRV-100)what status bit would indicate this? Watchdog? And can I tell which slave?

Title: Re: Slave Status fault bit ?
Post by: ADC Product Engineer on September 19, 2017, 08:28:22 AM

Take a look at help topic DMD0374 in the software.  There are a bunch of structure members that you can access.