Host Engineering Forum
General Category => General Discussion => Topic started by: odwyerpw on November 29, 2016, 09:32:23 PM
-
Folks,
I've messed with Automation Direct Stuff for years and have purchased quite a number of components.
So much of it has remained packed away for the last two years, therefore I would like to sell some of it.
Basically I have every DirectLogic PLC Module imaginable that is compatible with the DoMore H2-DM1E PLC. Lots of high end modules: Ethernet Remote Master, Ethernet Base Controllers, Hi Speed Counters, Thermocouple, RTD, Relay, 220V input, Combo Modules, Serial I/O, etc... In total about 35 modules. 3 110v D2-09B 9 slot racks. 2 GS1 110V single phase to 230 1HP 3phase Drives, 4 Baldor 230/460v 1/2 HP 3phase Motors, Fuses, lots of Filler Modules, Zip Cables, Zip Terminals, Rhino Power Supplies, NTron Ethernet Switch. A variety of matching buttons, switches, indicators and buzzers from AD. A nice C-More EA7 HMI Panel with Ethernet/USB and FlashMemory support.
I also have a 24" X 48" X 8" Hoffman Concept Enclosure with a back plane, din rails and wire trays. This will be offered separately as shipping it is a bit more work. Perhaps it might be better reserved for local South West Arizona pickup.
Here's a quick page I put up with photos of the components. The photos clearly identify all of the modules.. There is a black spot on my camera lens that shows up on all the fotos... So, no those aren't scorch marks on the terminals of one of the GS1 drives... just a bad camera lens.
http://sonoratechnical.com/pages/PLC.html (http://sonoratechnical.com/pages/PLC.html)
This equipment would be very useful on a project or an academic setting.
-
how much for the gs1 drive and is it for 110v single phase
the zip link
the hmi