Host Engineering Forum

General Category => General Discussion => Topic started by: ealltech on November 16, 2016, 06:28:52 AM

Title: require an aRM System on Module
Post by: ealltech on November 16, 2016, 06:28:52 AM
We require an System on module (Arm 9, Wince) and a carrier module supporting a 5” and 7” TFT (800*480) with Capacitive Touch screen.

SOM Requirements:

1)    CPU ARM9
2)    SDRAM: 128MB DDR2-400 (minimum)
3)    NAND Flash: 128MB (Minimum)
4)    UART: 1 Serial channel (minimum) RS485
5)    Ethernet 10/100 Base T
6)    LCD Controller 800*480 24bpp true colour
7)    SD card
8)    USB host
9)    USB OTG
10) RTC
11) Inclusion of certain drivers (ftdi specifically)