Host Engineering Forum
General Category => Do-more CPUs and Do-more Designer Software => Topic started by: Mike Nash on September 26, 2016, 08:59:11 PM
-
... to be able to File/Save Project As the name in the PLC that DmD must know but won't tell me if it didn't find a matching file. I saved it on another computer, not this one. Now, if I don't have the filename, it won't find it on the first computer either if I save a change from here. It's not a huge thing to me but it sure would be nice. So "Pretty Please?" can this be considered?
Connecting to a PLC with No Project Open
Clicking the New Online button of the Online toolbar and selecting one of the preconfigured communication links, or double-clicking one of the preconfigured links in the Launchpad will attempt to go online with the controller that link is configured to use.
If Do-more Designer successfully connects to the controller it will check to see if there's a project loaded into the controller. If so, Do-more Designer will then check the current projects folder to see if there is an offline project by that same name. If a project by that same name is present on disk, this message box will be displayed asking to open the disk-based project that matches the project in the controller.