Host Engineering Forum

General Category => DirectSOFT => Topic started by: jneill on May 20, 2008, 06:12:54 PM

Title: Comments and Ladder
Post by: jneill on May 20, 2008, 06:12:54 PM

Is there a way to save the comments when loading into the plc. I have some work to do on some plc's that have been programmed by someone else and there isn't any comments when loading from the plc! This makes going behind someone else very hard! ???

Title: Re: Comments and Ladder
Post by: b_carlton on May 20, 2008, 06:20:01 PM

The comments do not store into the AutomationDirect PLCs.

Title: Re: Comments and Ladder
Post by: jneill on May 21, 2008, 06:35:00 AM

But it would be really nice to at least have the option to do so.

Title: Re: Comments and Ladder
Post by: franji1 on May 21, 2008, 09:50:45 AM

This is one of those features we're working on...   8)

Title: Re: Comments and Ladder
Post by: Narf3684 on June 17, 2008, 12:49:51 AM

That is good. I thought you could save them. Well you could always print out the ladder with the coments, or just write them down, but that isn't going to help you.