Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: stoic-one on July 23, 2015, 11:09:01 PM

Title: Remote access via Cellular Gateway
Post by: stoic-one on July 23, 2015, 11:09:01 PM

In the process of configuring a cellular gateway to allow remote access to a small SCADA network.
I'm configuring it with incoming port forwarding to allow the C-More app to access 6 panels using port forwarding.

Is there a way to access a T1H-DM1E on this network remotely using the Do-More Software?

Title: Re: Remote access via Cellular Gateway
Post by: ADC Product Engineer on July 24, 2015, 08:32:12 AM

Yes.  In the System Configuration in the CPU section Under Internal Ethernet Port there is a checkbox for "Enable Secondary Ethernet Connection".  Change the port number to be unique and use this in your port forwarding arrangement.

When you create your remote link, you will need to do it manually.  In the port section, click "Advanced" and enter your unique port number at the bottom.

Title: Re: Remote access via Cellular Gateway
Post by: stoic-one on July 24, 2015, 10:51:13 AM

Thank you, I was wondering where you selected that port at, and it was right in front of me.