Host Engineering Forum

General Category => CTRIO and CTRIO2 => Topic started by: sparky1234 on March 12, 2008, 11:45:59 AM

Title: DL05 high speed input
Post by: sparky1234 on March 12, 2008, 11:45:59 AM

I'm new to the Automation Direct PLC's.  I need to measure the speed of a device that has a an output of 5VDC and a frequency of 0Hz-100Hz.  I'm not sure which mode would be best to chose.  Any help would be great.

Thanks

Title: Re: DL05 high speed input
Post by: MikeS on March 12, 2008, 03:37:46 PM

before we press on with suggestions, are you planning to use the onboard high speed inputs? or using the h0-ctrio module?

if it's the onboard hsio inputs, you're probably better off posting on the automationdirect.com forum, as that is their hardware, not ours.

if it the h0-ctrio module, you're at the right place.

Title: Re: DL05 high speed input
Post by: sparky1234 on March 12, 2008, 03:46:28 PM

Yes, I am using the onboard high speed inputs.  I believe I've got figured out now.  Sorry, I thought AD and Host eng. were one in the same.