Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: davidbgtx on August 12, 2014, 08:01:46 AM

Title: Do-More ethernet for multiple racks and data logging
Post by: davidbgtx on August 12, 2014, 08:01:46 AM

Can/could you use the ethernet port as expansion (say a couple of drives as Modbus/TCP, 2 racks with the H2-ECOM, 1 rack with T1H-EBC100, a C-More touchscreen) and also send data to Kepware over the same Port.

 I have a setup now with WinPLC, an ERM, 2 GS-EDRV's, TIH-EBC100 rack, a C-More touchscreen, 2 racks with H2-EBC100, and logging to kepware over same ethernet using a hub. There is a H2-CTRIO in one of the EBC racks. This config has been working for quite some time, but is very slow, looking for a way to speed things up and thought maybe the Do-More would be the ticket. What do you think?

Title: Re: Do-More ethernet for multiple racks and data logging
Post by: BobO on August 12, 2014, 08:56:23 AM

It should work fine. Obvious consideration is the more you do the more scan variation, but anything a WinPLC can do, Do-more should do better.