Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: jwbaker3 on July 30, 2014, 10:53:16 AM

Title: Profibus
Post by: jwbaker3 on July 30, 2014, 10:53:16 AM

I have a customer that has a MCC, all of the built-in starters and drives use profibus. Will the DoMore talk profibus?

Thanks,
JW

Title: Re: Profibus
Post by: franji1 on July 30, 2014, 11:14:26 AM

Do-more does not support Profibus as master or slave.

Title: Re: Profibus
Post by: Controls Guy on July 30, 2014, 04:17:28 PM

You should be able to buy a protocol bridge from Prosoft Technologies or somebody that will bridge it to Modbus/TCP, which Do-More understands just fine.