Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: fluidpowerman on July 23, 2014, 05:25:28 PM

Title: Filter Display with Transducer input thru domore onto cmore screen
Post by: fluidpowerman on July 23, 2014, 05:25:28 PM

I am using 4-20 mA pressure transducer inputs to my domore plc and viewing them on my cmore.  currently my display numbers bounce around between -2.00 and +2.00 on the display.  I have tried using the "first order filter" to nullify the readings to no avail.  I would appreciate any feedback on how I might be able to buffer it a bit so my number aren't jumping around and I can zero them out.

Thanks for the feedback

Title: Re: Filter Display with Transducer input thru domore onto cmore screen
Post by: BobO on July 23, 2014, 07:55:16 PM

You can greatly increase the aggressiveness of the filter and it should smooth out.

Title: Re: Filter Display with Transducer input thru domore onto cmore screen
Post by: fluidpowerman on July 24, 2014, 12:38:39 PM

Yes, It works great.  Thanks for the input :)