Host Engineering Forum

General Category => DirectSOFT => Topic started by: mhw on June 06, 2014, 08:19:01 AM

Title: Saving V memory
Post by: mhw on June 06, 2014, 08:19:01 AM

Under the PLC tab there is an option to "Copy Config data to disc". Where is this stored?

Title: Re: Saving V memory
Post by: franji1 on June 06, 2014, 09:07:15 AM

All the details of the various "read/write" operations, along with what DirectSOFT project files are affected, can be found in this chart:
http://www.hosteng.com/FAQFiles/DSP%20save%20and%20load%20chart2.pdf

(I got this from DirectSOFT FAQ #7: http://www.hosteng.com/FAQFiles/DirectSOFT.htm#FAQ0007)

The Copy Config Data can affect the project's files with the following extensions
.VD (V-memory)
.TLS (PLC parameters, I/O Config, Pause Bits)
.RD (305 R-memory)
.DV (DV1000 setup)
depending upon what is configured