Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: LWgreys on December 19, 2013, 10:53:53 PM

Title: INIT - Initialize Data - Editing BUG
Post by: LWgreys on December 19, 2013, 10:53:53 PM

A problem entering INIT - Initialize Data.
Topic from http://forum.automationdirect.com/showthread.php?p=53912#post53912 (http://forum.automationdirect.com/showthread.php?p=53912#post53912)
What I posted:
 I see what is happening. It's a bug in the editor, if you ask me.
When you select a V from the Element Browser it turns on the Start green indicator on but the End indicator is still RED which is an invalid entry for END.

Work around: after selecting the V location from the Element Browser, select the Start and press Enter Key again to get the End green valid input to turn ON.
OR
just type in the V location directly in to Start and press the Enter key.

Title: Re: INIT - Initialize Data - Editing BUG
Post by: franji1 on December 20, 2013, 09:30:28 AM

I duplicated this.  We'll get it fixed.