Host Engineering Forum

General Category => General Discussion => Topic started by: Altec on January 23, 2008, 01:13:40 PM

Title: Need help with cable selection
Post by: Altec on January 23, 2008, 01:13:40 PM

Can anyone tell me what cable I need to connect to a Koyo SA-21 processor?

Title: Re: Need help with cable selection
Post by: Greg on January 24, 2008, 03:23:28 PM

The Koyo SA-21 is equivalent to the Simatic TI325S... if that helps any. Cables... I don't know.

Title: Re: Need help with cable selection
Post by: MikeS on January 25, 2008, 08:40:30 AM

the automationdirect part number for the programming cable is d3-dscbl-2 (db9-to-db25, rs-232 cable).

if you don't already have one, in addition to the programming cable, you'll need the d3-232-dcu (it's a serial port adapter for the DL305 family CPUs).