Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: CReese on September 10, 2013, 11:53:42 AM

Title: Card compatibility
Post by: CReese on September 10, 2013, 11:53:42 AM

Are there standard IO modules that were used with DL260 CPUs in the DL205 bases that are known to be incompatible with the DoMore CPUs?

Thanks,
C

Title: Re: Card compatibility
Post by: franji1 on September 10, 2013, 12:19:14 PM

It supports all the "standard" Discrete and Analog I/O.

However, Do-more does not support the following specialty modules:
CTRIF (the slot 0 module, not CTRIO/2 which are supported by Do-more), DCM, RMSM, and Basic CoPro modules, along with the EM/CM base expansion "modules".

The H2-SERIO/4 is one that is NOT supported by 260 but IS supported by Do-more.

All the other specialty modules are supported (ERM, ECOM, ECOM100, CTRIO, CTRIO2, etc.).

Title: Re: Card compatibility
Post by: CReese on September 10, 2013, 06:44:15 PM

Perfect. Thank you.

C