News:

  • May 17, 2024, 03:28:57 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: noob.......  (Read 2417 times)

xjon007x

  • Newbie
  • *
  • Posts: 2
    • IM&E
noob.......
« on: January 27, 2010, 08:02:50 PM »
im very new at this PLC thing and i need some help gettin started programming
i have all the hardware hooked up but i cant figure out the programming...i have been working on elecrtic motors for a few years now and i have a pretty good understanding of electricity and all that good stuff. if someone can point me in the right direction or give me any advice or help i would appreciate it
Logged

b_carlton

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 606
    • thePLCguy
Re: noob.......
« Reply #1 on: January 27, 2010, 09:44:59 PM »
Try starting with the videos at http://learn.automationdirect.com/welcome.html.

Also the general learning of PLCs here http://www.plcs.net/contents.shtml

You should have the "Getting Started" book which came with the software or you can download the one for the 32bit version here http://www.automationdirect.com/static/manuals/qsds32/qsds32.html from AutomationDirect

"Skin that one greenhorn and I'll get you another!" from the movie Jeremiah Johnson
« Last Edit: January 27, 2010, 09:48:43 PM by b_carlton »
Logged
An output is a PLC's way of getting its inputs to change.

xjon007x

  • Newbie
  • *
  • Posts: 2
    • IM&E
Re: noob.......
« Reply #2 on: January 28, 2010, 07:48:24 PM »
thanks alot im gonna read up and see wat i can figure out from there...
are there any other sites i can go to to get any tutorials or anything like that?
Logged
Pages: [1]
« previous next »