Host Engineering Forum
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
July 20, 2018, 09:11:43 pm


Login with username, password and session length


Pages: [1]
  Print  
Author Topic: Invalaid data  (Read 1974 times)
mhw
Hero Member
*****
Posts: 173


« on: February 13, 2018, 08:11:39 am »

I have a location where the drive is either controlled locally by push buttons or remotely using a GSEDRV. There is a remote local switch connected to DI6. The problem is that the display will flash invalid data when it is in local control. Is there a way to get around this? It is causing confusion for the operator.
Logged
Greg
HOS†ech
Host Moderator
*****
Posts: 529


Hmmm...


WWW
« Reply #1 on: February 15, 2018, 10:45:05 am »

I assume it is a GS2 drive? Also, what is P3.05 set to?
Logged

There are two types of people in the world; those that can extrapolate from incomplete data sets.
mhw
Hero Member
*****
Posts: 173


« Reply #2 on: February 15, 2018, 01:48:03 pm »

Quote
I assume it is a GS2 drive?
GS3
Quote
[/Also, what is P3.05 set to?quote]
19
Logged
Greg
HOS†ech
Host Moderator
*****
Posts: 529


Hmmm...


WWW
« Reply #3 on: February 15, 2018, 04:41:09 pm »

I can duplicate this. When I switch to 2nd Source via DI6, then I see the "Invalid Data" flash up on the GS3's display. My 2nd Source I just left as "Keypad". This message is due to the GS-EDRV100 continuously reading & writing over the RS-485 serial connection even while the 2nd Source is picked. I know this because when I unplug the serial cable from my GS-EDRV100, the message goes away.

What is your 2nd Source? i.e. what are the values for P3.31 & P4.13?

However, I only see this message when I press the STOP on the display. If I leave it in Run Mode, I do not see this message.
« Last Edit: February 15, 2018, 04:43:10 pm by Greg » Logged

There are two types of people in the world; those that can extrapolate from incomplete data sets.
mhw
Hero Member
*****
Posts: 173


« Reply #4 on: February 16, 2018, 06:39:49 am »

P3.31=1
P4.13=5
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM