News:

  • March 28, 2024, 04:37:04 AM

Login with username, password and session length

Author Topic: Mutiple stages ON at the same time  (Read 1379 times)

davidbgtx

  • Hero Member
  • *****
  • Posts: 215
  • Host be the Most
Mutiple stages ON at the same time
« on: July 25, 2017, 12:44:10 PM »
I don't have any SGDIVRG instructions in a program yet somehow I have multiple stages active at once, is that possible?

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5975
  • Yes Pinky, Do-more will control the world!
Re: Mutiple stages ON at the same time
« Reply #1 on: July 25, 2017, 01:05:52 PM »
I don't have any SGDIVRG instructions in a program yet somehow I have multiple stages active at once, is that possible?

Multiple SGSET or JMP instructions can do that.
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

davidbgtx

  • Hero Member
  • *****
  • Posts: 215
  • Host be the Most
Re: Mutiple stages ON at the same time
« Reply #2 on: July 26, 2017, 09:39:22 AM »
Bad math was the culprit. In the expression it should have been ($Now.Minute/60.0)+($Now.Second/3600.0)+$Now.Hour+8.5 . I had left out the .0 in the $Now.Second/3600 . Thanks for your help.

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5975
  • Yes Pinky, Do-more will control the world!
Re: Mutiple stages ON at the same time
« Reply #3 on: July 26, 2017, 10:18:13 AM »
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO