I've used DNLoader to load programs into DL05's. Part of my program, I send data out PORT2.
I write a custom windows based companion program that captures the serial data streaming out PORT2, and displays and monitors the PLC INs and OUTs.
I need to set PORT2 to serial communication, 9600 baud, 8 bits, 1 stop, no parity, no handshake.
The problem is, DLoader doesn't set up the port, so I need to do it with Direct Logic, which defeats the entire purpose of use DNLoader.
Is there any way to get DNloader to read/write PORT2 setup configuration?
John Mc