Host Engineering Forum

General Category => NetEdit => Topic started by: Henryp on March 10, 2015, 03:37:36 pm



Title: Net Edit slow to launch
Post by: Henryp on March 10, 2015, 03:37:36 pm
I have a few computers where netedit takes two minutes before it displays anything.  What could cause a problem like this?


Title: Re: Net Edit slow to launch
Post by: BobO on March 10, 2015, 03:50:30 pm
Does it take a long time if you hit the rescan button, or just on startup?


Title: Re: Net Edit slow to launch
Post by: Henryp on April 07, 2015, 01:52:26 pm
A rescan takes just as long, about two minutes.


Title: Re: Net Edit slow to launch
Post by: BobO on April 07, 2015, 04:17:07 pm
Do those computers have anything like VPN adapters?


Title: Re: Net Edit slow to launch
Post by: Henryp on January 12, 2017, 03:28:15 pm
I still have this problem and now it is happening on more systems. The PCs are Windows 7 64 bit.


Title: Re: Net Edit slow to launch
Post by: BobO on January 12, 2017, 06:30:47 pm
How many devices are on your network? Are any connected through VPNs?


Title: Re: Net Edit slow to launch
Post by: Henryp on January 17, 2017, 12:59:19 pm
About 48, does a second NIC card create a problem?
 


Title: Re: Net Edit slow to launch
Post by: BobO on January 17, 2017, 01:12:24 pm
NetEdit first broadcasts a query for connected devices, then waits a second or two for them to answer. It then cycles through each device that answers and reads all of the general setup data of each. On Host's office network there's 30+ devices and that process takes about three or four seconds total. If Windows networking gums up the works by trying to connect through VPNs and such stuff, we've seen things hang up for a long time. Multiple NICs shouldn't be an issue, but you can use the Network->Adapter menu to choose which NIC to query.

About 90% of what's on our network is Do-more and most are running short programs, which means they will respond very fast. If you are mostly running DL with longer scan times, I'm sure that process is slower, but it seems unlikely that it would be that much slower.

From Task Manager, what does processor load look like? Wondering if something is hogging the CPU.

Once NetEdit is running, if you hit the Scan Network button does it take a super long time too?


Title: Re: Net Edit slow to launch
Post by: ADC Product Engineer on January 17, 2017, 02:30:08 pm
Multiple NICs shouldn't be an issue, but you can use the Network->Adapter menu to choose which NIC to query.

Multiple NICs usually aren't an issue.  It can be an issue when they have the same IP addressing and subnetting. 

IE

Wired NIC @ 192.168.1.1 - 255.255.255.0
Wireless NIC @ 192.168.1.10 - 255.255.255.0

This can cause all sorts of craziness.   It can get even crazier if you routinely plug and unplug wires from switches without power cycling the switch to clear the routing table.


Title: Re: Net Edit slow to launch
Post by: Henryp on January 25, 2017, 06:40:53 pm
It is not just one PC it happens on 4 or 5. Task manager shows no issues.