Host Engineering Forum
 
Home Help Search Login Register
*
Welcome, Guest. Please login or register.
Did you miss your activation email? 		May 22, 2012, 03:30:11 pm


Login with username, password and session length


Host Engineering Forum > General Category > DirectSOFT > DL 05 hepl
Pages: [1]
« previous next »
  Print  
Author Topic: DL 05 hepl  (Read 566 times)
acoudvnjak
Newbie
*
Posts: 2
« on: September 02, 2010, 10:33:33 am »
Hi, I work  acces control and I use DL 06 as my PLC. I have tried to send data (password) form HMI to PLC via comm port1. Lamps on PLC are blinking but I dont know (if it is posible) how to see my results. Also I need to connect PLC to PC via Comm port 2 and to send data form HMI to PC. Can anyone help me Huh Thanks
Logged
b_carlton
Internal Dev
****
Posts: 388



WWW
« Reply #1 on: September 02, 2010, 12:44:47 pm »
1. Have you written the DL06 program and downloaded it to the PLC? Does it run correctly?

2. What type HMI are you using? Does it appear to be properly communicating with the PLC? (Do any errors occur?)
Logged
An output is a PLC's way of getting its inputs to change.
acoudvnjak
Newbie
*
Posts: 2
« Reply #2 on: September 02, 2010, 03:16:31 pm »
I use Weintec MT6100i touch panel and I connect it to PLC as I see in instruction. Also I built some project on it and it works good. I don't write DL06 program ...That's what I need as help
Logged
b_carlton
Internal Dev
****
Posts: 388



WWW
« Reply #3 on: September 02, 2010, 03:33:35 pm »
I don't know that display so I can't help you there. If you have Directsoft you can use either port to program/monitor (or even add on an Ethernet card if you have a free slot).
Logged
An output is a PLC's way of getting its inputs to change.
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM