News:

  • June 09, 2026, 12:05:50 AM

Login with username, password and session length

Poll

about software needs

what
1 (100%)
what2
0 (0%)

Total Members Voted: 1

Voting closed: July 08, 2010, 03:14:09 PM

« previous next »
Pages: [1]

Author Topic: Getting and Setting register values with VB.net  (Read 10390 times)

Danok

  • Newbie
  • *
  • Posts: 1
Getting and Setting register values with VB.net
« on: July 07, 2010, 03:14:09 PM »
I'm wondering if I need KEPWARE, DirectNet or some other server/client software to access DirectLogic CPU's registers. I'm thinking I do but I'm new at Direct Logic programming and need a little assistance.
Logged

b_carlton

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 606
    • thePLCguy
Re: Getting and Setting register values with VB.net
« Reply #1 on: July 07, 2010, 03:58:41 PM »
You will need some type of communication server. PC-DSDATA available at http://www.automationdirect.com/adc/Shopping/Catalog/Software_Products/DSData_Server_(OPC_-a-_DDE)/DSData_Software and produced by the 'hosts' of this forum would be a good choice.

Oh, and I voted for the first choice, I thought the second too wordy.
Logged
An output is a PLC's way of getting its inputs to change.

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3607
  • Darth Ladder
Re: Getting and Setting register values with VB.net
« Reply #2 on: July 07, 2010, 04:44:58 PM »
I petition for the addition of a third choice:  "What(theheck)"
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.
Pages: [1]
« previous next »