Host Engineering Forum
 
Home Help Search Login Register
*
Welcome, Guest. Please login or register.
Did you miss your activation email? 		May 21, 2012, 08:47:25 pm


Login with username, password and session length


Host Engineering Forum > General Category > General Discussion > Revision History
Pages: [1]
« previous next »
  Print  
Author Topic: Revision History  (Read 1034 times)
MKL
Full Member
***
Posts: 42
« on: June 11, 2007, 04:34:46 pm »
hi,

on the website there's a new firmware available for the h0-ecom100: version 4.0.173

but what's new in this version? because the revision history is only to 4.0.169
Logged
MikeS
Host Moderator
*****
Posts: 176



WWW
« Reply #1 on: June 12, 2007, 10:19:29 am »
we're trying to fix this now, we're having some firewall difficulties with our web publishing software. in the mean time, here's the revision history for this ecom100 firmware release:

  • Added 'ECOM Advanced Settings' page to the Web browser configuration page. In previous firmware versions you could only adjust these settings via NetEdit3.
  • Fixed a problem with the Web browser configuration page where sometimes only a portion of the page would show up in the Web browser.
  • Added favicons to the Web browser configuration page.
  • If the ECOM100 receives a Modbus/TCP request for a value that is at either endpoint of the PLC's memory mapped ranges, the ECOM100 would erroneously report the value was out of range.
  • If the ECOM100 is operating as a Modbus/TCP server, the ECOM100 would not report the correct error value for a watchdog timeout error from one of it's clients.
Logged
Good design costs a lot. Bad design costs even more.
MKL
Full Member
***
Posts: 42
« Reply #2 on: June 12, 2007, 12:26:50 pm »
ok thnx for the info Smiley
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM